Instructions
G3 Lubrication Pump
Food and Beverage
Kit
333488A
EN
Converts a G3 Pump for use in food and beverage applications. For professional use only.
Model: 24V837
Maximum Working Pressure: 5100 psi (35.1 MPA,
351.6 bar)
Warnings
The following warnings are for the setup, use, grounding,
maintenance, and repair of this equipment. The exclamation
point symbol alerts you to a general warning and the hazard
symbols refer to procedure-specific risks. When these symbols
appear in the body of this manual or on warning labels, refer
back to these Warnings. Product-specific hazard symbols and
Important Safety Instructions
Read all warnings and instructions in this manual
and the G3 Pump manual. Save all instructions.
warnings not covered in this section may appear throughout
the body of this manual where applicable.
Parts Included in Kit
Ref Description
Qty
1*
2
3
ELEMENT, pump
FITTING, zerk
PLUG
1
1
2
WARNING
SKIN INJECTION HAZARD
High-pressure fluid from dispense device, hose
leaks, or ruptured components will pierce skin. This
may look like just a cut, but it is a serious injury that
can result in amputation. Get immediate surgical
treatment.
1a
Follow Pressure Relief Procedure in this manual
when you stop dispensing and before cleaning,
checking, or servicing equipment.
3
1
3
2
*Note the grooves (1a) around the surface of the hex head of
the pump element (1) included in the kit. These grooves are
added to help the user differentiate between the original pump
element and the new pump element for use with food and bev-
erage applications.
|